<ruby id="9ihkk"><output id="9ihkk"></output></ruby>
    <th id="9ihkk"></th>
  • <em id="9ihkk"><strike id="9ihkk"></strike></em><th id="9ihkk"></th>
      <li id="9ihkk"><acronym id="9ihkk"><cite id="9ihkk"></cite></acronym></li>
      <em id="9ihkk"><acronym id="9ihkk"></acronym></em><th id="9ihkk"></th>

      <nav id="9ihkk"></nav>

    1. <em id="9ihkk"></em>

      <%=NSW.OConfig.GlobalConfig.SiteName %>
      欢迎访问西宝生物官网 ! 股票代码:837709

      西宝生物

      西宝生物中国生命科学领域优选服务商!

      全国服务热线:400-021-8158

      24小时短信服务: 13917439331

      您是否在搜:岩藻糖 | 修饰性PEG | 维生素K2 | 玛卡提取物 | 食品安全 | 二噁英检测

      当前位置:首页 » 资讯中心 » 产品手册

      APSC尼龙6标准品(Nylon6分子量标准品)MSDS

      来源:作者:人气:-发表时间:2015-10-27 14:52:00【

      Material Safety Data Sheet

      Section 1: Identification
      Product Name: Nylon 6
      Product Nos.: NSIX
      Supplier/Manufacture: American Polymer Standards Corporation,
      8680 Tyler Blvd., Mentor, OH 44060
      Phone:440-255-2211 * Fax: 440-255-8397 * Email: apsc@ampolymer.com
      In Case of Emergency: (440) 255-2211
       
      Section 2: Hazardous Identification
      Hazard Classification: None classified
      Signal Word: No signal word
      GHS: Not a dangerous substance according to GHS
      HMIS Classification:
      Health Hazard: 0  
      Flamability: 0  
      Physical Hazards: 0  
      NFPA Rating:
      Health Hazards: 0  
      Fire: 0  
      Reactivity Hazards: 0  
      Potential Health Effects:
      Inhalation: May be harmful if inhaled. May cause respritory tract irritation.
      Skin: May be harmful if absorbed through skin. May cause skin irritation.
      Eyes: May cause eye irritation.
      Ingestion: May be harmful if swallowed.
       
      Section 3: Composition/Information on Ingredients
      Substance/Mixture: Substance CAS No.: 25038-54-4
      Chemical Name: Nylon 6 Synonyms: Polycaprolactam
       
      Section 4: First-Aid Measures
      Description of Necessary First-Aid Measures:
      Inhalation: Move person to fresh air; if effects occur, consult a physician
      Skin: Wash skin with plenty of water. Seek first-aid or medical attentions as needed. If molten material comes in contact with skin, do not apply ice but cool under ice water of running stream of eater. DO NOT attempt to remove the material from skin. Removal could result in severe tissue damage. Seek medical attention immediately. Suitable emergency safety shower facility should be immediately available
      Eyes: Flush eyes thoroughly with water for several minutes. Remove contact lenses after the initial 1-2 minutes and continue flushing for several additional minutes. If effects occur, consult a physician, preferably an ophthalmologist.
      Ingestion: If swallowed, seek medical attention. May cause gastrointestinal blockage. Do not give laxatives. Do not induce vomiting unless directed to do so by medical personnel.
      Description of Symptoms/Effects (both acute and delayed) & Symptoms of Overexposure:
      Inhalation: No known significant effects of critical hazards. No specific data regarding symptoms of overexposure.
      Skin: No known significant effects of critical hazards. No specific data regarding symptoms of overexposure.
      Eyes: No known significant effects of critical hazards. No specific data regarding symptoms of overexposure.
      Ingestion: No known significant effects of critical hazards. No specific data regarding symptoms of overexposure.
      Indication of Immediate Medical Attention & Special Treatment Needed, If Necessary:
      Note to Physician: Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.
      Specific Treatments: No specific treatment
      Protection of First-Aiders: No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
       
      Section 5: Fire-Fighting Measures
      Suitable Extinguishing Media: Use dry chemical powder, water spray (fog) , foam or CO2
      Unsuitable Extinguishing Media: Do not use water jet.
      Specific Hazards Arising from the Chemical: Carbon oxides
      Hazardous Thermal Decomposition Products: Decomposition products may include carbon oxides, nitrogen oxides
      Special Protective Actions for Fire-Fighters: Promptly isolate the scene by removing all persons form the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.
      Special Protective Equipment for Fire-Fighters: Fire-Fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
       
      Section 6: Accidental Release Measures
      Personal Precautions, Protective Equipment & Emergency Procedures: Spilled material may cause a slipping hazard. Avoid dust formation. Keep unnecessary and unprotected personnel from entering the area. Use appropriate safety equipment. For additional information, refer to Section 8: Exposure Controls & Personal Protection.
      Environmental Precautions: Prevent from entering into soil, ditches, sewers, waterways and/or groundwater. For additional information, refer to Section 12: Ecological Information.
      Methods & Materials for Containment & Clean Up: Contain spilled material if possible. Sweep up. Collect in suitable and properly labeled containers. For additional information, refer to Section 13: Disposal Considerations.
       
      Section 7: Handling & Storage
      Precautions for Safe Handling: No smoking, open flames or sources of ignition in handling and storage areas. Wear appropriate personal protective equipment (refer to Section 8). Avoid inhalation. Avoid contact with eyes, skin and clothing. Avoid creation of dust. Ensure adequate ventilation.
      Conditions for Safe Storage: Keep container tightly closed in a dry and well ventilated place.
       
      Section 8: Exposure Controls & Personal Protection
      Exposure Limits: Contains no substances with occupational exposure limit values.
      Engineering Controls: Safety shower and eye bath. Mechanical exhaust required.
      Personal Protective Measures:
      Respiratory: Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (SU) or CEN (EU).
      Hand: Protective gloves
      Eye: Chemical safety goggles
      Skin: Personal protective equipment for the body should be selected based on the task being performed and the risk involved.
      Hygiene Measures: Wash thoroughly after handling.
       
      Section 9: Physical & Chemical Properties
      Appearance: Physical State & Color: Pellets/Off White
      Odor: Odorless
      Odor Threshold: Not Available
      pH: Not Available
      Melting Point: Not Available
      Boiling Point: Not Available
      Flash Point: Not Available
      Evaporation Rate: Not Available
      Flammability (solid, gas): Not Available
      Lower & Upper Flammability/Explosive Limits: Not Available
      Vapor Pressure: Not Available
      Vapor Density: Not Available
      Relative Density: Not Available
      Solubility: Not Available
      Partition coefficient: n-octanol/water: Not Available
      Auto-ignition Temperature: Not Available
      Decomposition Temperature: Not Available
      Viscosity: Not Available
       
      Section 10: Stability & Reactivity
      Reactivity: No specific test data related to reactivity available for this product or its ingredients.
      Chemical Stability: The product is stable.
      Possibility of Hazardous Reactions: Under normal conditions of storage and use, hazardous reactions will not occur.
      Conditions to Avoid: None known
      Incompatible materials: None known
      Hazardous Decomposition Products: Strong oxidizing agents, Strong bases
       
      Section 11: Toxicology Information
      Acute Toxicity Mouse – 30h – 11,000mg/m3
      Oral LD50: No Data Available
      Inhalation LC50: No Data Available
      Dermal LD50: No Data Available
      Skin Corrosion/Irritation: Prolonged contact is essentially nonirritating to skin. Repeated contact may cause flaking and softening of skin
      Serious Eye Damage/Irritation: May cause slight temporary eye irritation. Corneal injury is unlikely.
      Respiratory or Skin Sensitization: No Data Available
      Germ Cell Mutagenicity: No Data Available
      Reproductive Toxicity: No Data Available
      Teratogenicity: No Data Available
      Specific Target Organ Toxicity-Single Exposure: No Data Available
      Specific Target Organ Toxicity-Repeated Exposure: No Data Available
      Aspiration Hazard: No Data Available
      Carcinogenicity
      IARC: No component of this product, present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
      IARC: 3– Group 3: Not classifiable as to its carcinogenicity to humans (Styrene, oligomers)
      ACGIH: No component of this product, present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by ACGIH.
      NTP: No component of this product, present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by NTP.
      OSHA: No component of this product, present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by OSHA.
      Potential Health Effects
      Inhalation: May be harmful if inhaled. May cause respiratory tract irritation.
      Ingestion: May be harmful if swallowed.
      Skin: May be harmful if absorbed through skin. May cause skin irritation.
      Eyes: May cause eye irritation.
       
      Section 12: Ecological Information
      Toxicity: No Data Available Persistence & Degradability: No Data Available
      Bio-accumulative Potential: No Data Available Mobility in Soil: No Data Available
       
      Section 13: Disposal Considerations
      Disposal Methods: Disposal practices must be in compliance with all Federal, State and Local laws and regulations. DO NOT DUMP INTO ANY SEWERS, ON THE GROUND OR INTO ANY BODY OF WATER. Contact a licensed professional waste disposal service to ensure proper disposal.
       
      Section 14: Transport Information
      DOT (US): Not Regulated IMDG: Not Regulated IATA: Not Regulated
       
      Section 15: Regulatory Information
      OSHA Hazards: No known hazards
      SARA 302 Components: No chemical in this material are subject to reporting requirements of SARA Title III, Section 302.
      SARA 311/312 Components: No SARA Hazardds
      SARA 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels establilsed by SARA Title III, Section 313.
      Right To Know Components:  
      Masachusetts: No components of the material are subject to Massachusetts Right to Know Act.
      New Jersey: Nylon 6    CAS # 25038-54-4
      Pennsylvania: Nylon 6    CAS # 25038-54-4
      California Prop 65: No components found
      Canada Inventory: This Material is listed or exempted.
       
      Section 16: Other Information
      Date of Issue: March 28, 2014
      Date of Last Revision/Review: No previous revision/review
      DISCLAMER: For R&D use only. Not for use in Food, Drugs or Cosmetics. The information contained in this MSDS is the most accurate and complete information available to us. APSC expresses or implies no warranty to the information provided and assumes no liability. The material covered in this MSDS is only provided in 1 gram quantities and is not expected to posse any health or environmental risks based on these quantities.
       
      American Polymer Standards Corporation * 8680 Tyler Blvd. * Mentor, OH 44060 * USA
      * Phone: 440-255-2211 * Fax: 440-255-8397


      Last Revised: May 13, 2015
      西宝生物大楼
      西宝生物科技(上海)股份有限公司(837709.OC),2003 年成立于张江高科技园区,现已成为生命科学领域集研发、生产、贸易、进出口、技术服务一体化的综合服务商。西宝生物主营包括IVD原料,科研试剂,新材料和健康产品四大板块和服务。除自营Seebio和Canmedo(康美多)、泉养堂、五藏养生品牌外,西宝生物代理了Wako、APSC、Jackson、Ludger、Bioporto、Lumiprobe、Aalto等知名品牌。西宝生物正致力于分子诊断、转化医学、干细胞、抗衰老等研发领域,依托产学研创新平台,打造大健康产业链,以持续不竭的技术创新、稳定可靠的优质产品和专业便捷的技术服务,提供更具价值、创新性和定制化的综合解决方案,与您携手共创美好的明天。
      西宝生物官网二维码 西宝生物微信服务号:iseebio 西宝生物微博:seebiobiotech
      官网:www.inlandrovers.com 微信服务号:iseebio 微博:seebiobiotech
      西宝商城二维码 mall.seebio.cn 微信订阅号:seebiotech 康美多官网:www.canmedo.com
      商城:mall.seebio.cn 微信订阅号:seebiotech 康美多:www.canmedo.com
      巨奖彩票平台